GUT155 Wheelchair - Controller Fault Warning Diagram

GUT155 Wheelchair - Controller Fault Warning Diagram

Question: The customer's wheelchair is not functioning properly, and they are requesting a replacement for the left motor and the joystick controller.

Suggestion : You can determine whether the issue lies with the joystick controller or the left motor by following this method: swap the connector wires of the left and right motors to observe how many beeps the alert makes. After turning on the device, do not operate the joystick; just let the controller emit the sound. If it beeps twice after the swap, the controller is faulty. If it beeps four times, there is a problem with the left motor. Attached is the Controller Fault Warning Diagram for your reference.

    • Related Articles

    • GUT166 - GoRide 2 Wheelchair Troubleshooting

      Troubleshooting Guide Overview This article guides you through troubleshooting continuous beeping issues on the SuperHandy GoRide 2 wheelchair and resetting the controller when needed. Continuous beeping is often an indication of a fault in the ...

    • Customer misconceptions on GUT155 joystick

      Question: 1、Customer told joystick doesn't work,The battery is charged and turned on, everything is connected, the breaks are off and the chair is turned on. However, the joystick just wobbles around and will not work. The power lights just keep ...

    • Tugger not turning on GUO098

      Q:Tugger stopped moving,the battery button turns on correctly and the battery checker shows a charged battery but the tugger will not move. After replacing a new forward/Reverse Swtich,it still won't move. A:Please check the wiring as per the ...

    • Customer Service Duties and Operation Rules

      Please refer to the attachment of Customer Service Duties and Operation Rules