GUO077&GUO079&GUO084-thrust plate(NEW/OLD VERSION)

Regarding the thrust plate of the log splitter, due to improvements made by the factory to the product, if a customer requires this part, it is necessary to confirm with them in advance the diameter of the central hole in the push plate they have. This will help distinguish between the new and old versions, as they are not interchangeable. 

K3#8.05.00.153  GUO077&GUO079&GUO084-thrust plate(NEW VERSION 51mm)

K3#8.05.00.175  GUO077&GUO079&GUO084-thrust plate(OLD VERSION 33mm)

• Related Articles

• How to disassemble the GUT166 wheel and install new motor?

  Please check the attached two videos which will guide you how to disassmble the GUT166 wheel and install the new motor.

• Walk Behind Leaf Blower Iteration Content Description 吹叶机迭代内容说明

  Evaluation information on whether old and new materials are interchangeable after upgrading hand-push leaf blowers 手推式吹叶机升级后，新老物料是否可以互换的评估资料

• Customer Service Duties and Operation Rules

  Please refer to the attachment of Customer Service Duties and Operation Rules

• How to change throttle of SuperHandy 4 wheeled scooter - GUT161

  Step 1: Remove the handle by loosening the screw on the throttle. Handle Loosen Screw Remove Handle Step 2: Open the cord box by unscrewing the four screws. Step 3: Unscrew the two screws on the cover to access and remove the throttle cord. Step 4: ...

• Tugger not turning on GUO098

  Q:Tugger stopped moving,the battery button turns on correctly and the battery checker shows a charged battery but the tugger will not move. After replacing a new forward/Reverse Swtich,it still won't move. A:Please check the wiring as per the ...