How to solve the problem of GUO110 belt being too tight?
Q:Customer asked the belt for GUO110 is so tight it will not release to disengage.
A:Solve the problem by increasing the gap between these limitators and the belt.
Related Articles
Customer Service Duties and Operation Rules
Please refer to the attachment of Customer Service Duties and Operation Rules
Fuel tank leaking（GUO117）-Unclogging the carburetor
Q: Gas was poured into the tank and it started leaking right away (please check the first issue video) A:Grease problem or impurities in the oil. The carburetor needs to be cleaned and unblocked.Please check the second and third video
Assembling Black Plastic Rings SuperHandy Floor Lift GUT168/GUT167
The black plastic ring is usually fixed on the push rod, but some customers made a feedback that the bracket fell off when they received the goods, and they installed it incorrectly, causing the battery to fall off. They asked us to resend the parts. ...
Tugger not turning on GUO098
Q:Tugger stopped moving,the battery button turns on correctly and the battery checker shows a charged battery but the tugger will not move. After replacing a new forward/Reverse Swtich,it still won't move. A:Please check the wiring as per the ...
GUT155 Wheelchair - Controller Fault Warning Diagram
Question: The customer's wheelchair is not functioning properly, and they are requesting a replacement for the left motor and the joystick controller. Suggestion : You can determine whether the issue lies with the joystick controller or the left ...